Steel Bridge Drainage Gully

• For welding into the steel roadway plate
• Gully body made of steel S235 JR, thickness 10 mm, hot-dip galvanised Grate made of nodular cast iron (GJS)
• Based on guide drawing WAS 4
• Class D400 DIN EN 124 DIN 1229
• Grate cross-section 260x500
• Slot width approx. 30 mm / inlet cross section 580 cm² / with damping grate support
• Hot galvanised sludge bucket, capacity 6 liters
• With or without seepage holes (Standard: 6 seepage holes Ø 30 mm all-round Height top edge drain to bottom edge seepage hole = 70 mm)
• Gully outlet DN 150 / Ø 159